Boxer engine sound: how a turbo flat-four rumbles
Brul is a web app that plays a realistic engine sound through your car’s own speakers and follows your throttle. Its Flat-4 turbo is the boxer rumble: an evenly firing flat-four whose unequal-length headers deliver the pulses unevenly, with a turbo that flutters when you lift.

- Layout
- Flat (boxer) four-cylinder, turbocharged
- Cylinders
- 4, two per side
- Firing interval
- 180°, even (2 pulses per revolution)
- Firing order
- 1-3-2-4 (typical turbo boxer)
- Rumble from
- Unequal-length exhaust headers
- Idle / redline in Brul
- 800 / 7,000 rpm
- In Brul
- Comes with Brul Pro, like all 13 engines
What is a boxer engine?
A boxer, or flat engine, lays its cylinders flat in two opposing banks, one on each side of the crankshaft. A flat-four has two cylinders per side and fires evenly every 180°: two pulses per revolution. In the turbo boxers known for their rumble, the firing order is 1-3-2-4: two cylinders on one bank, then two on the other.
Fed through equal-length exhaust pipes, a flat-four sounds smooth and fairly high, much like an inline-four. The rumble comes from somewhere else.
Why does a boxer engine rumble?
The rumble is in the plumbing, not the firing. On the classic turbo boxer, the headers from cylinders 2 and 4 are clearly longer than those from 1 and 3, because one bank’s pipes run under the engine to join the other side on the way to the turbo. The pulses leave the cylinders evenly but reach the collector at uneven moments, in bunches.
Slow a recording down and you see strong and weak pulses taking turns. In the spectrum, the energy spreads over whole and half orders that beat against each other, and your ear hears that beating as a low burble, strongest at idle and low revs.
Which cars made the boxer rumble famous?
This is the type of engine in cars such as the Subaru WRX and WRX STI with their turbocharged EJ-series boxers. Fit equal-length headers and most of the burble goes: the engine then sounds much more like an ordinary four-cylinder. A flat-six is a different animal: it wails rather than rumbles.
Car names only describe a type of engine. Brul is not affiliated with or endorsed by any car maker.
What does Brul model in the Flat-4 turbo?
Brul calculates the sound live, pulse by pulse, through a modelled exhaust: no recordings.
- Even 180° firing, with header delays that make the pulses arrive unevenly, strong and weak in turn.
- A deliberate choice: Brul’s header difference is larger than a real engine’s. Physically accurate pipe lengths about halved the idle rumble, and the rumble is the point, so Brul kept it.
- A short idle pulse with extra ring from the exhaust port, which adds midrange so the rumble also comes through smaller speakers.
- A turbo with whistle, whoosh and the longest spool-down of Brul’s turbo engines, plus the blow-off that flutters most often.
- Rounder, deeper pops than the 4-cylinder turbo: a boxer burble on the overrun rather than a crackle.
- Exhaust pipes that follow the gas temperature as the engine works harder. Its label in the app is Burble.
How do you get the best boxer sound in Brul?
Set it up while parked. Sport, Track, the exhaust choice, pops and Tunnel mode are part of Brul Pro.
- Open brul.app, pick Flat-4 turbo under Sound of, and choose your own car under Your car.
- Let it idle and pull away gently: the rumble lives at low revs.
- Accelerate firmly, then lift off: that is when you hear the blow-off and, often, the flutter.
- Pick Straight pipe for the loudest burble and more crackle, or Stock for a muffled daily sound.
- On a phone speaker, turn on Small speaker to hear the low end; through the car’s speakers you can leave it off.
- Keep the volume low enough to hear traffic and sirens, and don’t touch the phone while driving.
Listen: boxer-four, flat-six and four-cylinder
The Flat-4 turbo and the 4-cylinder turbo both fire evenly every 180°, yet sound very different: that is mostly the headers at work. The Flat-6 is a boxer with six cylinders, no turbo and a 9,000 rpm redline.
Give your car the boxer rumble
Open brul.app on your phone in any car, over Bluetooth or a cable, or in your Tesla’s browser. Nothing to install, no subscription.
Start the engineQuestions
Why does a boxer engine rumble?
Because of unequal-length exhaust headers. A flat-four fires evenly, but longer pipes from cylinders 2 and 4 make the pulses reach the collector unevenly, and you hear that as a low burble.
Do all boxer engines rumble?
No. With equal-length headers a flat-four sounds smoother and higher, close to an inline-four. The rumble belongs to boxers with unequal headers.
Does a turbo boxer need a blow-off valve for the ‘pssh’?
Usually, yes. Factory bypass valves tend to recirculate the air quietly, so the loud ‘pssh’ mostly comes from aftermarket blow-off valves. Brul’s Flat-4 turbo plays the blow-off and flutters more often than the other turbo engines.
Can I use the Flat-4 turbo for free?
Yes, for a while. The first 5 minutes of Brul in Simulation are Pro, with every engine, and Drive adds a 10-minute test drive; then you decide. Brul Pro is €9.99 once.