BRUL.
Engines · VTEC 4-cylinder

VTEC engine sound: the cam switches, the four screams

Brul is a web app that plays a realistic engine sound through your car’s own speakers and follows your throttle. Its VTEC 4-cylinder is the high-revving four without a turbo: raspy and metallic low down, and above 5,800 rpm the cam switches and it screams to 10,000.

5 minutes of Pro free in Simulation and a 10-minute test drive in Drive · then €9.99 once · no account

VTEC 4-cylinder
VTEC 4-cylinder4 cyl. · as in Integra Type R
At a glance
Layout
Inline four-cylinder, naturally aspirated, two cam profiles
Cylinders
4
Firing interval
180°, even (2 pulses per revolution)
Cam switch in Brul
Up at 5,800 rpm, back at 5,600 rpm
Idle / redline in Brul
850 / 10,000 rpm
In Brul
Pro engine

What is a VTEC four-cylinder?

It is a four-cylinder in a row without a turbo, built to rev. Each cylinder fires once every two revolutions, so the four fire evenly every 180°: two pulses per revolution, or 333 a second at 10,000 rpm.

VTEC is Honda’s system with two cam profiles on one camshaft. At low revs the valves follow a mild profile; at high revs oil pressure locks in a taller one that opens the valves further and holds them open longer. Below the switch the engine breathes like a road car, above it like a race engine.

Why does a VTEC engine change its voice?

Two cams in one

The mild cam fills the cylinders gently. The tall cam lets in more air per stroke, so the pulses in the intake and the exhaust hit harder.

The switch

It happens at one engine speed, in a fraction of a second. The note does not rise smoothly: it jumps, louder and brighter at once.

Intake roar

Much of the famous sound comes from the intake, not the exhaust: the air rushing past the open throttle starts to ring.

A raw metal edge

Equal-length exhaust pipes keep the beat clean. What you hear on top is the hard, metallic rasp of short, sharp pulses.

Which cars made the VTEC sound famous?

This is the type of engine in the Honda Integra Type R of the 1990s: 1.8 litres, about 110 hp per litre without a turbo, and a red line at 8,400 rpm. The cam switch just under 6,000 rpm became a phrase of its own. Brul’s version goes further, like a built engine: it revs on to 10,000 rpm.

Car names only describe a type of engine. VTEC is a trademark of Honda Motor Co., Ltd. Brul is not affiliated with or endorsed by any car maker.

What does Brul model in the VTEC 4-cylinder?

Brul calculates it live, pulse by pulse, through a modelled exhaust: no recordings.

  • Four cylinders firing every 180°, each slightly different in strength and timing: that gives the raw edge.
  • Two cam states. Above 5,800 rpm with enough throttle the high cam takes over; it switches back below 5,600 rpm.
  • On the high cam the exhaust valve opens earlier and the pulses get shorter and harder.
  • An intake that rings around 1.2 kHz and gets much louder on the high cam.
  • Metallic resonances of the header and the intake, also below the switch, so the engine never sounds dull.
  • The jump was tuned against recordings of real cars: about 7 dB louder, mostly between 300 Hz and 3 kHz, within a quarter of a second.

Low cam vs high cam in Brul

Low camHigh cam
Engine speedIdle to 5,800 rpm5,800 to 10,000 rpm
ThrottleAnyMore than about a third
Exhaust pulsesRounderShorter and harder, valve opens 8° earlier
SoundRaspy and metallicAbout 7 dB louder: a raw, metallic scream

The engine switches back to the low cam below 5,600 rpm, so it does not flutter between the two.

How do you hear the cam switch in Brul?

Set it up while parked. Sport, Track, the exhaust choice, pops and Tunnel mode are part of Brul Pro.

  1. Open brul.app, pick VTEC 4-cylinder under Sound of, and choose the car you drive under Your car.
  2. Choose Sport for shift points that follow your throttle, or Track for late upshifts, rev-matched downshifts and pops always on.
  3. Give it plenty of throttle: with a light foot the gearbox shifts up before 5,800 rpm and the engine stays on the low cam.
  4. Pick an exhaust: Stock is muffled and civilised, Sport is full and open, Straight pipe is raw, loud and crackling.
  5. Keep the volume low enough to hear traffic and sirens, and don’t touch the phone while driving.

Listen: VTEC four, turbo four and flat-six

VTEC 4-cylinder4 cyl. · as in Integra Type R
4-cylinder turbo4 cyl. · as in Golf R
Flat-66 cyl. · as in Porsche 911

Two fours and a six: the VTEC 4-cylinder revs to 10,000 rpm without a turbo, the 4-cylinder turbo whistles and pops, and the Flat-6 wails to 9,000.

Give your car a VTEC four

Open brul.app on your phone in any car, over Bluetooth or a cable, or in your Tesla’s browser. No subscription, and one purchase covers up to 5 devices.

Start the engine

5 minutes of Pro free in Simulation and a 10-minute test drive in Drive · then €9.99 once · no account

FAQ

Questions

At what rpm does the cam switch in Brul?

At 5,800 rpm on the way up, if you give more than about a third throttle. It switches back below 5,600 rpm. Real engines of this type switch between 5,700 and 6,000 rpm.

Why don’t I hear the switch when I drive gently?

Because the gearbox shifts up before 5,800 rpm when you are light on the throttle, just as you would in the real car. Press on, or choose Sport or Track, and the engine revs through the switch.

Is the VTEC sound in Brul a recording?

No. Brul calculates every pulse live, so the sound follows your throttle and speed. The size and colour of the jump were tuned against recordings of real cars.