Tesla engine sound app, right in the car’s browser
Brul is a Tesla engine sound app that runs as a website in the car’s own browser: it plays a synthesized engine sound through your Tesla’s cabin speakers, following your speed and throttle as you drive. Open brul.app, pick one of 13 engines and press Start: nothing to install, no account and no phone needed.

Does a Tesla have an engine sound?
No. A Tesla drives on electric motors, so there is no combustion, no firing cylinders and no exhaust. Inside you hear a faint motor whine, the tyres and the wind. The sound newer Teslas make at low speed is a pedestrian warning for people outside the car, not an engine.
Brul adds the part that’s missing, inside the cabin: an engine that idles, revs with your speed, shifts through seven gears, blips the throttle on downshifts and sounds like engine braking when you lift off. Choose a cross-plane V8, a flat-six that revs to 9,000 rpm, a V12 or a twin-rotor rotary.
Brul is not affiliated with or endorsed by Tesla or any other car maker; the name is used here only to say where Brul runs.
How do you add engine sound to a Tesla?
Set it up while parked. In the car’s browser Brul takes throttle and speed from the Tesla’s own GPS, so there is nothing to calibrate.
- Park, open the web browser on the touchscreen and go to brul.app.
- Choose Drive. Under Your car, pick your model so Brul knows its weight and power; under Sound of, pick an engine.
- Press Start and allow location when the browser asks. The sound plays through the car’s speakers; set the level with the car’s own volume control.
- If the car is on Wi-Fi, turn on Remain connected in Drive, or use your phone’s hotspot.
- Drive. Keep the volume low enough to hear traffic and sirens, and leave the screen alone while you’re moving.
Car GPS or phone as sensor: what’s the difference?
Out of the box, Brul in a Tesla works from the car’s GPS. Add a phone in a holder and it becomes the throttle sensor, for an engine that answers your right foot straight away.
| Car GPS | Phone as sensor | |
|---|---|---|
| What Brul reads | Speed from the car’s GPS; throttle is worked out from changes in speed | Throttle from the phone’s motion sensors, plus speed and reverse |
| Response | Follows your speed, a moment after your foot | Almost instant: the sensors register a change within a few tens of milliseconds, sent to the car about 30 times a second |
| Setup | None | Scan a QR code in the car once with your phone; in its holder the phone calibrates itself as you pull away |
| If the signal drops | In a tunnel the GPS drops out; with tunnel mode (Pro) the engine echoes off the walls | After one second without data from the phone, the car carries on with its own GPS |
| Data | Location is used only in the car’s browser and not stored | Throttle, speed and direction pass through a relay that doesn’t store them; it only remembers that your phone and car are paired. No location, no coordinates |
| Included in | The 10-minute test drive and Brul Pro | The same: the test drive and Brul Pro |
A GPS speed reading needs a moment to show a change (on a phone, 1 to 2 seconds), while a motion sensor feels it almost at once. That is why the phone is the faster throttle sensor.
How do you use your phone as a sensor?
Optional. Pair once, while parked: after that your phone and your car find each other as soon as Brul is open in Drive on both. You scan a QR code on the car’s screen with your phone; there’s nothing to type in the car. If Brul Pro is on your phone, pairing it this way also unlocks Pro in the car.
- Open brul.app in the car and choose Drive. A QR code appears below the rev counter (or under Settings › Phone as sensor).
- Scan it with your phone’s camera: Brul opens on the phone and pairs right away. Rather type? Open Brul on the phone, tap Connect to your car › Both and enter the code.
- Fix your phone firmly in a holder and drive straight off with firm throttle: it calibrates once. Until then the car uses its own GPS.
- Keep the phone’s screen on. Black screen turns it completely black (on an OLED screen the pixels are off) while it keeps sending; tap twice to come back. On Android you can even switch to another app: Brul keeps sending from a small floating window.
- Drive. If the phone goes to sleep or stops sending for more than a second, the car switches to its own GPS by itself.
What does Brul do on the road?
Seven gears
Brul runs your speed through seven virtual gears, shifting up as you accelerate and blipping the throttle on the way down.
Lift off, hear it brake
Regenerative braking sounds like engine braking: ease off gently and the engine coasts, lift off properly and you hear it hold the car back.
Comfort, Sport or Track
Comfort is calm, shifts early and never pops. Sport shifts with your throttle. Track is louder, holds gears longer, rev-matches every downshift and always pops.
Tunnel mode
With Brul Pro: when the GPS drops out in a tunnel while you keep driving, the engine echoes off the walls, with extra pops when you lift off.
Which engine should your Tesla have?
Each clip is the real Brul sound: start-up, full throttle through the gears, then lift off. The cross-plane V8 idles at 700 rpm with a lumpy lope; the big-block is deeper and slower; the V12 sings up to 8,700 rpm; the twin-rotor rotary braps at idle and revs to 8,000. All thirteen are in the engine guide.
What does it cost?
Brul Pro is a one-time purchase, not a subscription, and one purchase covers both your phone and your Tesla.
| Brul | |
|---|---|
| Try first | 5 minutes with everything in Simulation and a 10-minute test drive in Drive |
| Brul Pro | €9.99 once (or $9.99 / £9.99), VAT included |
| Subscription | None |
| Account | None: Pro is stored on your device |
| Devices | Up to 5, such as your phone and your Tesla |
| New phone or cleared browser | Restore Pro with the email address from your purchase |
| Brul Pro includes | All 13 engines, Sport and Track, pops and bangs, exhaust choice, tunnel mode and your phone as sensor |
Engine-sound web apps that charge by the month asked $3 to $9.99 a month when we checked in October 2026. At $3 a month you would pass Brul’s one-time price in the fourth month.
Ready for the first drive?
Park, open brul.app in the car’s browser and press Start. Try it free now, with every engine unlocked.
Start your engineQuestions
Do I need my phone in the Tesla?
No. In the car’s browser Brul works on its own, with the Tesla’s GPS and no calibration. Your phone is an optional extra in Brul Pro that makes the engine react instantly to your throttle.
Which Tesla models does Brul work in?
Brul runs in the built-in web browser, so it works in Teslas that have one. Its car list includes versions of the Model 3, Model Y, Model S, Model X and Cybertruck, so the throttle calculation uses your car’s weight, power and top speed.
Is there a delay?
With the car’s GPS, the engine follows your speed, so it reacts a moment after your foot. With your phone as a sensor, its motion sensors pick up a change within a few tens of milliseconds and send it to the car about 30 times a second, which feels instant.
Can people outside hear it? Does it use the Boombox speaker?
Only as much as they hear your music. Brul plays through the car’s cabin speakers like any other sound from the browser; it does not use the external pedestrian speaker.
Does it keep playing while I drive?
Yes, that’s what it is made for: Brul runs in the browser while you drive and plays through the car’s speakers. Set it up before you set off, and if the car was on Wi-Fi, turn on Remain connected in Drive or use your phone’s hotspot.
Does the sound run smoothly in the Tesla’s browser?
Yes. While you drive, Brul switches the Tesla’s screen to a lighter display by itself, and it does the same as soon as the picture or the sound stutters, so the sound gets the computing power. To keep that lighter display on all the time, turn on Fewer effects under Settings › More.
Can my Tesla sound like a specific supercar?
Brul has engine types rather than brand sounds: cross-plane, flat-plane and big-block V8s, a V10, a race V10, a V12, an inline-six, a flat-six, four- and five-cylinder turbos, a flat-four turbo and a twin-rotor rotary. Each is built from its own firing order, exhaust and rev range, so pick the character you’re after.
Is there a Tesla V8 or exhaust sound app?
Yes: Brul gives your Tesla the engine noise of a V8, or of 12 other engines, through the cabin speakers. With Brul Pro you also choose the exhaust (stock, sport or straight pipe) and get pops and bangs when you lift off. The steps are in the Tesla guide, and how Brul compares with other apps is on the comparison page.
Does Brul connect to my Tesla or change how it drives?
No. Brul is a web page that only makes sound. Nothing is installed in the car, it does not connect to the car’s systems, and the car drives exactly as before.
Is it a subscription?
No. You get 5 minutes of Pro free in Simulation and a free 10-minute test drive in Drive. Brul Pro costs €9.99 once ($9.99 / £9.99) and covers up to 5 devices, such as your phone and your Tesla. If the test drive ends while you drive, the purchase screen waits until you have parked.
Does Brul track my location?
No. Location and motion are used only on your device to work out throttle and speed; they are not stored and never sent to anyone. With phone as sensor, only throttle, speed and direction (no coordinates) pass through a relay that doesn’t store them; it only remembers that your phone and car are paired. Details are on the privacy page.