Inline-6 engine sound: smooth as silk, sharp at 8,000 rpm
Brul is a web app that plays a realistic engine sound through your car’s speakers and follows your throttle. Its Inline-6 is a naturally aspirated straight six that fires evenly every 120 degrees and revs to 8,000 rpm.

- Layout
- Inline-6 (straight six), naturally aspirated
- Firing interval
- 120° crank angle, even
- Typical firing order
- 1-5-3-6-2-4
- Main tone
- 3rd order; 6th-order wail at high revs
- Idle / redline in Brul
- 800 / 8,000 rpm
- In Brul
- Pro engine
What is an inline-six?
An inline-six, or straight six, has six cylinders in a single row on one crankshaft. Each cylinder fires once per 720 degrees, so six cylinders fire every 120 degrees: three pulses per revolution.
The most common firing order is 1-5-3-6-2-4. It alternates between the front three and the rear three cylinders, so each half fires evenly every 240 degrees. That is why performance straight sixes often use two three-into-one exhaust manifolds.
Why does a straight six sound so smooth?
Six equal, evenly spaced pulses produce a clean set of harmonics: the third order (three pulses per revolution), the sixth and the ninth. These form consonant musical intervals, which acoustic research links to why six-cylinder engines sound pleasant. Half-orders, the in-between tones that make an engine sound raw or lumpy, hardly appear.
Revs add the edge. At an 800 rpm idle the engine fires 40 times a second: a soft purr. Near 8,000 rpm it fires 400 times a second, and the sixth order rises with the intake roar into a hard, metallic wail. Silk at a cruise, a rasp at the top.
Which cars made the straight-six sound famous?
Brul’s Inline-6 is modelled on the type of engine in the E46-generation BMW M3: a 3.2-litre, naturally aspirated straight six with an 8,000 rpm redline and six individual throttle bodies. Turbocharged straight sixes, such as the type in the 1990s Toyota Supra or the Nissan Skyline GT-R, are the same family, but a turbine damps the pulses and adds whistle.
Brul is not affiliated with or endorsed by any car maker. Names only describe the type of engine.
What does Brul model in the Inline-6?
Brul synthesizes the sound live, cylinder by cylinder. For the Inline-6 that means:
- Six equal, clean pulses every 120 degrees, with the least flow noise of all thirteen engines.
- Two exhaust groups of three cylinders whose pulses arrive 2.5 crank degrees apart: enough to sound real, small enough to keep the orders clean.
- A shriek peak on the sixth order from half the redline up, with a stronger intake towards 8,000 rpm.
- Pipe lengths tuned so that no fixed resonance hums at one pitch: the tone moves with the revs.
- A warm exhaust impulse response.
- Gentle, sparse crackle on lift-off, true to a smooth six.
Inline-six vs flat-six: what is the difference?
| Inline-6 | Flat-6 | |
|---|---|---|
| Layout | One row of six | Two flat banks of three |
| Firing interval | 120°, even | 120°, even |
| Typical firing order | 1-5-3-6-2-4 | 1-6-2-4-3-5 |
| Exhaust pulses in Brul | Two groups of three, 2.5° apart | Two banks, slightly offset in time |
| What you hear | Clean 3rd, 6th and 9th orders: silk | Added half-orders: a raspier bark and wail |
| Idle / redline in Brul | 800 / 8,000 rpm | 850 / 9,000 rpm |
Flat-six firing order as used by Porsche.
How do you get the best Inline-6 sound in Brul?
- Drive mode: Sport suits it best, because the shift points follow your throttle: drive gently for silk, use full throttle to rev into the wail.
- Exhaust: Straight pipe brings out the rasp and adds about 2 dB. Stock is smoother and about 2 dB quieter.
- Pops: the Inline-6 crackles softly by design. For more, switch on Pops and bangs or choose Track.
- Top speed: a lower value gives shorter gears, so you reach the upper revs at normal road speeds.
- The Inline-6 itself, Sport, Track, exhaust choice and pops are part of Brul Pro; top speed is a free setting. Set it up before you drive, leave the phone alone while driving, and keep the volume low enough to hear traffic and sirens.
Listen: Inline-6, Flat-6 and 5-cylinder turbo
The same short drive for each: start-up, full throttle through the gears, lift off. Notice how the straight six stays smooth, the flat-six adds rasp and the five-cylinder warbles.
Start the Inline-6
Open brul.app on your phone in any car, or in your Tesla’s browser. Try it free now, with every engine unlocked.
Try it freeQuestions
Why does an inline-six sound so smooth?
It fires evenly every 120 degrees from a single row, so its sound is built from clean harmonics (the third, sixth and ninth orders) that form consonant intervals. There are almost no half-orders to make it lumpy.
What is the firing order of an inline-six?
Usually 1-5-3-6-2-4: it alternates between the front and rear three cylinders, so one cylinder fires every 120 degrees.
Inline-six vs flat-six: why do they sound different?
Both fire every 120 degrees; the difference is in the exhaust. A flat-six’s two banks deliver their pulses slightly offset in time, which adds half-orders and a raspier edge. In an inline-six the pulses arrive more evenly, so its harmonics stay clean.
Is Brul’s Inline-6 turbocharged?
No. It is naturally aspirated, modelled on a high-revving 3.2-litre type with an 8,000 rpm redline. Brul’s turbo engines are the 4-cylinder turbo, 5-cylinder turbo, Flat-4 turbo and Rotary turbo.